A recent advance in long-distance subsea cable monitoring has demonstrated how rapidly cable-assurance technology is developing.

Sumitomo Electric and AP Sensing have announced a system capable of continuously monitoring more than 600 kilometres of high-voltage direct current, or HVDC, submarine cable. HVDC technology is used to transmit large quantities of electricity efficiently over long distances, including through offshore wind export cables and subsea interconnectors.

Using distributed acoustic sensing and optical-fibre technology, the system detected a simulated anchor impact more than 260 kilometres offshore and identified its position to within 68.4 metres.

This represents an important advance for asset owners. Earlier detection and more accurate location of external impacts could help operators respond faster, reduce the area requiring inspection and limit the time and cost associated with locating cable damage.

However, it also raises a wider question for offshore energy projects: how much cable risk could be identified or reduced during installation, before the asset is energised?

Visibility should start during installation

Operational monitoring can help detect what happens to a cable once it is in service. The installation phase presents a different set of risks and uncertainties.

Project teams need to understand where the cable is touching down, how it is behaving as it approaches the seabed and whether the installation is progressing as intended. This becomes particularly relevant during bundled HVDC cable installation, where project teams need reliable information about the lay operation while there is still an opportunity to respond.

CableFish has been developed to provide greater visibility during this critical stage. Mounted to the cable during installation, it can provide live video and sonar, touchdown-position information and cable catenary-angle information. It can also provide a view of the seabed ahead of the cable, helping the installation team identify obstacles and understand what is happening below the surface.

This information can support better-informed operational decisions and create a clearer record of how the cable was installed.

CableFish is not a replacement for long-term cable-integrity monitoring. It does not directly measure cable tension or guarantee that a cable will not fail. Its role is complementary: providing useful information during the installation window, when there may still be an opportunity to act.

A whole-lifecycle approach to HVDC cable assurance

The direction of travel is clear. Cable assurance should not begin only after installation or once a fault has occurred.

A stronger approach connects three stages: planning the route, installation method and evidence requirements; maintaining visibility and recording useful information during installation; and monitoring and protecting the cable throughout its operational life.

The Sumitomo Electric and AP Sensing development demonstrates what may increasingly be possible during the operational phase. CableFish addresses an earlier part of the same lifecycle challenge by helping project teams understand what is happening while bundled HVDC cables are being laid.

For developers and project owners, the important question is not simply which individual technology to use. It is what information they should require at each stage to reduce uncertainty, support operational decisions and create a stronger record of the asset from installation onwards.

Sources to link beneath the article

Sumitomo Electric announcement on long-distance HVDC cable monitoring

CIGRE paper Early Detection of External Damage Incidents in Long-Distance Direct Current Submarine Cables

Dave Rigg is Managing Director of North Sea Systems. For further information about CableFish and its installation-monitoring applications, contact drigg@northseasystems.com or info@northseasystems.com.